Now I have done the work with the mirrors for the
walls in my dollhouse. They can stand by themselves.
I will ony attach them with some double sided tape.
Made a couple of tile walls also. They are white so I
decorated them a little.
I thought the bathroom was too small so I took
down a wall and moved it a bit, to get more space. .
I also had to repaint the back wall and redo two of
the floors. That was Hard work I can tell.
Since I took down the wall, I can now show you
how I hang doors in my doll houses. I only use two
steel pins to each door. "The door-frame was
already there in this house".
*The upper hole in the wall above the door, must
be the same length as the steel pin, so it can fall
down into the hole in the door that is half size.
Fasten the upper steel pin with a piece of tape, then insert the door. Then pull off the tape and the
pin falls into the hole in the door *
*This description above applies if there is already
an existing door frame attached, or if there is no
frame at all that will be used.= This makes it
possible to change the door to another one if you
want*
* If you build an entire new door frame to be inserted
frame at all that will be used.= This makes it
possible to change the door to another one if you
want*
* If you build an entire new door frame to be inserted
in the wall, insert the pins before you glue the door
frame parts together. All holes must/can then be half
as deep/long as steel pins length. *
as deep/long as steel pins length. *
There was little marks on the floor and the wall
surface after I took down the wall, and when that
happens, I use this kind of scrape. Useful for removing
old dried glue and other things. I have a special just
for hobby (and a similar one for my glass stove).
So now I can furnish and decorate the bathroom.
It will be fun.
NOTE! TO "PINTEREST AND OTHER FORUMS"
IF YOU "PIN MY PHOTOS", LEAVE A COMMENT SO I
KNOW THAT YOU HAVE DONE THAT AND TELL ME
WHERE THEY "WILL BE SHOWN". *** Thank you