DONE WITH THE MIRROR WALLS FOR MY DOLLHOUSE BATHROOM AND CHANGED A WALL

Now I have done the work with the mirrors for the

walls in my dollhouse. They can stand by themselves.

I will ony attach them with some double sided tape.

Made a couple of tile walls also. They are white so I

decorated them a little.

I thought the bathroom was too small so I took

down a wall and moved it a bit, to get more space. .

I also had to repaint the back wall and redo two of

the floors. That was Hard work I can tell.

Since I took down the wall, I can now show you

how I hang doors in my doll houses. I only use two

steel pins to each door. "The door-frame was 

already there in this house".

*The upper hole in the wall above the door, must 

be the same length as the steel pin, so it can fall 

down into the hole in the door that is half size. 

Fasten the upper steel pin with a piece of tape, 
then insert the door. Then pull off the tape and the 
pin falls into the hole in the door *

*This description above applies if there is already 

an existing door frame attached, or if there is no 
frame at all that will  be used.= This makes it 
possible to change the door to another one if you 
want*

* If you build an entire new door frame to be inserted

 in the wall, insert the pins before you glue the door 

frame parts together. All holes must/can then be half 
as deep/long as steel pins length. *

There was little marks on the floor and the wall

surface after I took down the wall, and when that

happens, I use this kind of scrape. Useful for removing

old dried glue and other things. I have a special just

for hobby (and a similar one for my glass stove).

So now I can furnish and decorate the bathroom.

It will be fun.

 

NOTE! TO "PINTEREST AND OTHER FORUMS"
IF YOU "PIN MY PHOTOS", LEAVE A COMMENT SO I
KNOW THAT YOU HAVE DONE THAT AND TELL ME
WHERE THEY "WILL BE SHOWN". *** Thank you